18
C
HARGE
/I
N
U
SE
I
NDICATOR
When the charge/in use indicator on the base is lit, the handset is correctly
seated in the cradle and is charging. The indicator flashes when the base is
paged, when the base pages the handset, or when you receive an
incoming call. The indicator is also lit when the handset is in use.
M
AKING
A
C
ALL
WITH
THE
H
ANDSET
1. Pick up the handset and press the talk/call back button. Listen for a
dial tone.
2. Dial the desired number, or pre-dial the number first then press the talk/
call back button.
3. When finished, press the talk/call back button again to hang up.
M
AKING
A
C
ALL
WITH
THE
S
PEAKERPHONE
1. Press the speaker button on the base. You will hear a dial tone.
2. Dial a number. Or, pre-dial the number and then press the speaker
button.
BASE IN USE shows in the handset display.
3. When finished, press the speaker button to hang up.
NOTE:
You can enter up to 32 pre-dial digits. If you want to delete the pre-dial
number you entered, press the delete button on base or del/chan button on
handset until all of the digits are erased.
A
NSWERING
A
C
ALL
WITH
THE
H
ANDSET
1. When the phone rings, press the talk/call back button on the handset.
2. When finished, press the talk/call back button again to hang up.
A
NSWERING
A
C
ALL
WITH
THE
S
PEAKERPHONE
1. When the phone rings, press the speaker button to answer a call.
2. When finished press speaker to hang up.
NOTE:
If you are using the handset and want to switch to the speakerphone,
press the speaker button on the base first, and then either press the talk/call
back button on the handset to switch it off, or put the handset in the base
cradle. When the speaker button is pressed, the button lights. If you want to
switch from speakerphone to handset, press the talk/call back button on the
handset first, and then press the speaker button on the base.
