7
Multi-Camera Operation
This wireless surveillance system is designed to
work with up to 2 cameras. Additional cameras
are sold separately.
IMPORTANT: When using
more than one camera, each camera must be
assigned to a specifi c channel using the channel
selection switch located on the underside of the
camera housing.
Select either 1 or 2 for each camera. Each camera
must be assigned to a specifi c channel; both
cameras cannot be on the same channel or the
signals will cancel out. If using only one camera
you can select either Ch 1 or Ch 2, whichever
provides the best picture. The slide switch located
on the rear of the Receiver must be set to refl ect
the channels in use.
Auto Mode (2 Camera Operation)
To have the Monitor automatically switch between
two active channels, fi rst check the receiver is set
CAMERA 1
Channel Setting
CAMERA 2
Channel Setting
1 2
1 2
MONITOR
Video Out
CHANNEL
13.5V 1.2A
BEEP
V-HOLD
BRIGHT
CONT
TRIGGER
1 2 1/2
Audio Out
–
+
–
+
Channel
Selection
switch
