background image

14

range, and that no large obstructions are blocking 
the signal.

2. Try repositioning the camera, receiver or both to 
improve the reception quality.

3. If a camera is positioned close to the receiver 
point antenna away from the receiver.

4. Reposition other nearby equipment transmitting 
on the 900MHz frequency.

5. Adjust the antenna for the camera, receiver or 
both to obtain best image.

Audio problems

1. Ensure the volume is turned up suffi ciently on the 
Monitor (or TV).

2. Make sure the sound is within the microphone 
range.

3. If the unit emits a loud wailing sound (feeds back), 
try moving the camera away from the receiver or 
angle the receiver differently.

SPECIFICATIONS   

(Subject to change without notice.)

CAMERA

TV System .....................................................................................................NTSC
Integrated Lens...................................................5.6mm, F1.8 fi xed focus
Resolution .............................................................. 360 horizontal TV Lines
High-Speed Electronic Shutter ............................1/60 - 1/15,000 sec
Image Sensor .................................................................................. 1/3” CMOS

Summary of Contents for 45234

















Reviews: