background image

Before connecting or operating the Garage Door 

Sensor, please read these instructions carefully and 

save this manual for future reference.

Congratulations

The GE Choice Alert

 Wireless Alarm System is one  

of the most affordable and expandable wireless  
alarm systems available. You’ll discover that the 
system offers many features typically found in custom 
installed Alarm systems. 
The Choice Alert system is reliable and easy-to-
use. With Choice Alert you can select from a line of 
Sensors and Accessories; start small and expand 
as you need, or create a system that meets all your 
needs. The Choice Alert System is protected by Priority 
Code Selection technology which provides increased 
security and trouble-free wireless connections. It  
also guarantees the Control Center will only respond 
to signals from your Sensors in and around your home, 
and prevents anyone from tampering with  
your system.
The user manual explains in simple steps how to 
install, use and care for your new Choice Alert  
Garage Door Sensor.

If you have any questions or would like  
additional information please visit our web site  
www.jascoproducts.com, or contact our 

 

Customer Service Group at 1-800-654-8483.

Summary of Contents for 45130

















Reviews: