11
Preparing to install the refrigerator.
Door Reversal
1. Remove the two screws from under the
screw caps located on the top cover.
2. Remove the two screws from the back of
the top cover and remove top cover.
3. Remove the top hinge by removing the
two screws, as shown.
4. Remove the freezer door by lifting off of
the middle hinge.
5. Remove the J-shaped hinge support on the
bottom of the freezer door.
6. Install new J-shaped hinge support on the
opposite side of the freezer door bottom.
The new J-shaped hinge support and
mounting screw are located in a zip lock
bag that is shipped with the refrigerator.
7. Remove the fresh food door by lifting off
the bottom hinge.
8. Remove both adjustable legs.
9. Remove the bottom hinge and re-install on
the opposite side of the refrigerator.
10. Re-install the adjustable legs. Insure that
the smaller leg is on the same side as the
bottom hinge.
11. Place the fresh food door on the bottom
hinge.
12. Place the bottom peg of the middle hinge
in the fresh food door. Re-install middle
hinge. Make sure the fresh food door is
aligned with the refrigerator cabinet before
tightening screws.
13. Place the freezer door on the top peg of
the middle hinge. Place the top hinge peg
into the freezer door. Re-install top hinge.
Make sure the freezer door is aligned with
the refrigerator cabinet before tightening
screws..
14. Re-install the top cover with four screws..
15. Replace the screw caps.
Safety Instructions
Operating Instructions
Tr
oubleshooting T
ips
Consumer Support
Installation Instructions
Summary of Contents for 3ft 2 Door
Page 15: ...Notes 15 ...
