4
6
Telephone base installation
1. Plug the smaller end of the power adapter into the power jack at
the back of the telephone base.
2. Plug one end of the telephone line into the jack at the back of the
telephone base.
3. Plug the other end of the telephone line into a telephone wall jack.
4. Plug the larger end of the power adapter into an electrical outlet
not controlled by a wall switch.
DSL filter (not included)
is required if you have
DSL high speed Internet
service.
Telephone base installation
Telephone jack requirements
To use this phone, you need a RJ11C type modular
telephone jack, which might look like the one pictured
here. If you do not have a modular jack, call your telephone
service provider to find out how to have one installed.
If you have DSL high speed Internet service, a DSL filter is
required (not included). Contact your DSL service provider
for more information about DSL filter.
Wall plate
Modular
telephone
line jack
Installing on a desk
4. Place the handset onto the charger as shown. An
animated battery icon will display after a few minutes
to show that the handset battery is successfully being
charged. For optimum performance, please allow the
battery to charge for 16 hours before first use.
Animated
charging
indicator
Initial settings
Date and time
In order for your answering system to accurately mark your messages,
you must set the time and date.
1. Press
.
2. Press
or
to select
CLOCK & ALARM
and then
press
.
3. Press
again to select
SET DATE/TIME
.
4. Enter the current month, day and year. For example,
May 16, 2010 should be entered as [0], [5], [1], [6], [1],
[0].
5. Press
to confirm.
6. Enter the current hour and minute. For example, 9:30
should be entered as [0], [9], [3], [0]. Press
or
to select
AM
or
PM
and then press
to confirm.
Please refer to your 30522 user’s guide for complete
telephone settings.
CLOCK & ALARM
>SET DATE/TIME
10:30
PM
11/20
SET DATE
05/16/10
10:30
PM
11/20
SET TIME
09:30 PM
10:30
PM
11/20
3
Handset layout
off/cancel
• During a call, press to hang up.
• During programming, press to cancel and
exit without making changes.
CID/volume up
• Press to review the call
log when the telephone
is not in use.
• While in menu, press to
scroll up.
• During a call, press
to increase the incoming
volume.
• During a call, press to
answer an incoming
call if you receive a call
waiting alert (if you
have subscribed to the
call waiting feature
from your service
provider).
• Press to access message
playback when in idle
mode.
del/int
• Press to delete the last
number or letter entered.
• Press to initiate an
intercom call or transfer
a call .
volume down
• While in menu, press to
scroll down.
• During a call, press to
decrease the incoming
volume.
menu/ok/mute
• Press to show menu.
• Press to select an item, or to
save an entry or setting.
• Press to mute a call,
press again to resume
conversation.
redial/format
• Press to review redial list.
• Press to change the
telephone number format (7
digits, 1+, or 1+ area code)
for appropriate dialing.
talk/speaker
• Press to make or answer
a call.
• Press to switch to
speakerphone during
a call or message
playback.
• During a call, press to
switch between
speakerphone and
normal handset use.
phonebook
• Press to review the
phonebook when the
telephone is not in use.
*/tone
• During a call, press
to send touch-tone
signals temporarily.
#/pause/ringer off
• Press and hold to turn the
ringer off.
• Press and hold to add a
dialing pause when dialing
or entering numbers into
phonebook.
5
Charger installation (For models with additional handsets)
CAUTION:
1. Use only the power adapter that came with this unit.
Using other power adapters may damage the unit.
2. To prevent fire or electrical shock hazard, do not
expose this product to rain or moisture.
Battery installation
Please fully charge your handset before use!
For optimum battery performance, charge the battery for 16 hours before first
use.
1. Plug the battery connector
securely into the socket
inside the handset battery
compartment. Make sure that
red and black wires on the
plug are properly inserted into
the socket as shown.
2. Place the
battery and
the wire inside
the battery
compartment.
3. Align the cover
against the
battery
compartment
and slide it
upwards until
it clicks into
place.
red
wire
black
wire
1. Plug the smaller end of the power adapter into
the charger.
2. Plug the larger end of the power adapter into
an electrical outlet not controlled by a wall
switch.
CAUTION:
1. Use only the supplied rechargeable battery or equivalent replacement battery.
See battery specifications on the Technical specification page in your 30522
user’s guide or visit our website at
www.gephones.com
to find out how to order
a replacement battery if necessary.
2. If the handset will not be used for an extended period of time, unplug the battery
and remove it from the handset to prevent possible leakage.