1
Remote Access
You can access your answerer from any touch-tone phone from another location
by entering your 3-digit security code (the default security code is 1 2 3, but you can
change it.) Be aware that remote functions do not work with rotary or push-button
pulse-dialing phones.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security code.
The unit confirms your code with a beep. To bypass the greeting, you can enter
your 3-digit security code any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security code
has been entered. Menu selections can be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it is turned off or the
memory is full. To access the answerer, enter the 3-digit security
code after the beep. If memory is full, play messages and erase
some of them to restore memory.
NOTE: After the unit plays the remote menu, it waits 20 seconds for
a command, then disconnects.
Remote Access Commands
Play new message
1
Play all messages
2
Repeat messages (
during message playback
)
5
Play previous message (
during message playback
)
6
Skip to next message (
during message playback
)
7
Erase message (
during message playback
)
0
Stop playback (
during message playback
)
4
Turn answerer on/off
3
End call
4
