manualshive.com logo in svg

GE 28801FE1 - Digital Cordless Extension Handset, User Manual

Share
Download
GE 28801FE1 - Digital Cordless Extension Handset User Manual Download Page 60

60

Answering System Solutions

Can’t hear messages, beep, etc.
•  Adjust speaker volume.
Time/Day setting stuck at 1 a.m Mon.
•  Set the time clock. 
Answers on 10th ring
•  Make sure answering system is turned on.
•  Answering system memory may be full. Erase some messages.
Incoming messages are incomplete
•  An extension phone may have been lifted as a message is received.
•  Answering system memory is full. Erase some messages.
•  You may have accidently pressed the play/stop button during playback and 

stopped the message.

Won’t respond to remote commands
•  You must use a tone-dial phone. This phone does not support pulse (rotary) 

dialing.

•  Make sure to enter the correct security code.
•  Did unit hang up? If you take no action for a period of time,  

it automatically hangs up.

Summary of Contents for 28801FE1 - Digital Cordless Extension Handset









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands