speaker volume and L8 is the maximum.
Outgoing Announcement
When the unit answers a call, an outgoing message is played to callers
You can use either:
-
your own outgoing message
-
a pre-recorded outgoing message
Recording Outgoing Announcement
You can record the outgoing message through the base microphone or handset microphone
Base:
1.
Press and hold [
]
2.
After a beep sounds, you should move 9 inches from the base microphone and speak clearly into the base
microphone. (2 minutes max)
3.
Release [
] to stop recording
Handset:
1. [
]
2. [
]/[
]: “ANSWERER”
→
[OK]
3. [
]/[
]: “RECORD OGM”
→
[OK]
4. [
]/[
]: “RECORD MSGS” OR ‘ANSWER ONLY”
→
[OK]
5. [
]/[
]: “RECORD OGM”
→
[OK]
6.
After a beep sounds, hold the handset about 8 inches away and speak clearly into the microphone (2
minutes max.)
7.
Press [
] to stop recording
8. [
]
Using a pre-recorded Outgoing Announcement
If you erase or do not record your own outgoing message, the unit plays a pre-recorded message asking callers to leave a
message.
Resetting to a pre-recorded Outgoing Announcement
If you want to use a pre-recorded outgoing message once you record your own greeting message, you need to erase your
own outgoing message.
1. [
]
2. [
]/[
]: “ANSWERER”
→
[OK]
3. [
]/[
]: “RECORD OGM”
→
[OK]
4. [
]/[
]: “RECORD MSGS” OR ‘ANSWER ONLY”
→
[OK]
5. [
]/[
]: “DELETE”
→
[OK]
6.
The handset shall play back the pre-recorded outgoing message
7. [
]
Summary of Contents for 28517 Series
Page 25: ......