manualshive.com logo in svg

GE 28512, Manual, Page: 37 / 43

Share
Download
GE 28512 Manual Download Page 37

Appendix

33

operation of its business and not inconsistent with FCC Rules and Regulations. If 

these changes are expected to affect the use or performance of your telephone 

equipment, the telephone company must give you adequate notice, in writing, 

to allow you to maintain uninterrupted service. This device complies with Part 

15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 

device may not cause harmful interference; and (2) This device must accept 

any interference received, including interference that may cause undesired 

operation. This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference in a 

residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. 
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the 

following measures:

• 

Reorient or relocate the receiving antenna (that is, the antenna for radio or 

television that is “receiving” the interference).

• 

Reorient or relocate and increase the separation between the 

telecommunications equipment and receiving antenna.

• 

Connect the telecommunications equipment into an outlet on a circuit 

different from that to which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult an 

experienced radio/television technician for additional suggestions. 

The changes 

or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.
Hearing Aid Compatibility (HAC)

This equipment meets FCC standards for Hearing Aid Compatibility
If this product has a memory dialing feature, you may choose to store 

emergency phone numbers such as police, fire or medical within the memory 

locations. If you do store or emergency numbers, we suggest you also write 

these numbers down so that you can still dial the number manually if the 

memory dialing fails.   

Summary of Contents for 28512












































Reviews:

No comments