GE 28301, User Manual

Page: 16 / 48

16
back into the base and wall outlet. Reconnect the battery
and charge for 16 hours.
Handset displays "
SEARCHING
" or "
NOT REGISTERED
" and
cannot link up with the base when the TALK/CALL BACK
button is pressed.
• Handset may be out of range of the base. Move closer to
the base.
• Make sure the power adaptor is properly installed.
• Disconnect the handset battery and plug it in again. Place
the handset on the cradle for at least to minutes.
• Disconnect the power adaptor and plug it in again. Then
place the handset on the cradle for at least to minutes.
Handset displays " HANDSET NEEDS REGISTRATION "
• Follow the programming in the telephone procedures to
re-register the handset to the base.
• Press the SELECT button to begin handset registration.
Follow instructions on Handset screen.
Registration did not work
• Charge the batteries for 16 hours.
• Uplug and then plug in the power adaptor.
Caller ID Solutions
No Display
• Charge or replace the batteries.
• Make sure that the unit is connected to a non-switched
electrical outlet. Disconnect the AC power adaptor from
the base and reconnect it.