39
Erase message
0 (during message playback)
Skip message
3
Turn off/on answering system
4
Review voice menu options
7
The base LCD shows
REMOTE ACCESS ANSWERING CALL
.
TIP:
You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.
Changing the Security Code
The default security code for accessing the answering system from another
location is 1 2 3.
The security code is set through the programming menu. Refer to Telephone
Set Up for more information.
Changing the Battery
Make sure the telephone is
OFF
(not in TALK mode) before you replace
battery.
1. Remove the battery compartment cover.
2. Disconnect the battery plug from the jack inside the battery compartment
and remove the battery pack from the handset.
3. Insert the new battery pack and reconnect the battery plug to the jack
inside the compartment.
4. Put the battery compartment cover back on.
5. Place handset in charge cradle to charge.
If you don’t charge the
handset battery properly (for 16 hours) when you first set up the phone
and/or when you install a new battery pack, the battery’s long-term
performance will be compromised.
NOTE:
If the battery is not properly installed in the handset, or if the battery
pack is not properly connected to the jack inside the battery compartment,
“
NO BATTERY
” shows in the display when you place the handset back in the
charge cradle.
