7
D
ESKTOP
I
NSTALLATION
NOTE:
for desktop charging only, the handset is able to charge facing up
or down.
1. Remove the battery compartment door on the handset, insert the battery
pack, plug the cord into the jack (inside the compartment), and replace
the compartment door.
2. Set the ringer switch (on the handset) to ON, and place handset in the
cradle on the base.
3. Plug the power supply into the power jack on the back of base and the
other end into an electrical outlet. The “charge/page” indicator comes on
verifying the battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don’t
properly charge the phone, battery performance will be compromised.
4. Plug the telephone line cord into the PHONE LINE jack on the back of the
base and into a modular phone jack.
NOTE :
The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type
of service you have, check with the phone company.
CAUTION:
Use only the ATLINKS USA, Inc. 5-2521 power supply
that is compatible with this unit. Using other power supplies may
damage the unit.
3
2
1
4