6. Use your hammer and lightly tap in
the supplied drywall anchors until
they are flush with receptacle.
7. Use your Phillips screwdriver. Screw in
the screws provided until they
stick out about 1/16".
8. Mount the antenna onto the screws
by lining up the keyhole slots on the
back of the antenna with the screws.
Be sure you have routed the coax
cable in the direction you want the
cable to go by using the cable channel
on the bottom of the antenna.
Installation:
1. Attach the coax cable from the antenna
to the power amplifier “ANT IN”
2. Connect the attached coax cable
from the amplifier labeled “TO
TV” to the back of the TV
3.
For televisions equipped with USB ports:
Connect the supplied USB cable to the USB
port on the amplifier, then connect the
other end to your television’s USB port.
For televisions without USB ports:
Connect the supplied USB cable to the USB
port on the amplifier, then connect the
other end to the supplied AC adapter. Plug
the AC adapter into an available outlet.
