24
I
NSERTING
A
P
AUSE
IN
THE
D
IALING
S
EQUENCE
Press the # pause button to insert a delay in the dialing sequence of a
stored telephone number. A pause is needed to wait for a dial tone (for
example after you dial 9 for an outside line, or to wait for a computer
access tone). Each pause counts as 1 digit in the dialing sequence.
R
EVIEWING
AND
D
ELETING
S
TORED
N
UMBERS
1. Make sure the phone is
OFF
(not in TALK mode).
2. Press the memory button.
3. Use the CID/VOL left (-) or right (+) arrow button to scroll to the desired
memory location or press 0-9.
4. While the entry is displaying, press the answerer/delete button to delete
the entry. The display shows
DELETE?.
5. Press answerer/delete again to confirm. The display shows
DELETED.
A
DVANCED
F
EATURES
T
EMPORARY
T
ONE
This feature is useful only if you use pulse dialing service. Temporary tone
dialing enables pulse (rotary) service phone users to access touch-tone
services offered by banks, credit card companies, etc. For example, when
you call your bank you may need to enter your account number. Using the
temporary tone feature allows you to temporarily switch to touch tone
mode so you can enter and send your number.
1. Dial the telephone number and wait for the line to connect.
2. When your call is answered, press the *tone/exit button on your
handset number pad to temporarily change from pulse dialing to
tone dialing.
3. Follow the automated instructions to get the information you need.
4. Hang up the handset and the phone automatically returns to pulse
(rotary) dialing mode.
