background image

11

Volume/Mute Control and Punch-

Through

This remote lets you select which device Mode 

controls your Volume/Mute buttons. The remote is 

initially set for all device Modes to use their own 

Volume/Mute control if present. If the programmed 

code has no Volume/Mute operation of its own 

then those buttons will punch-through control to 

the 

TV

 Mode device without needing to change to

 

TV

 Mode. 

Setting ALL Volume/Mute Control to 

any one Mode

This routine can set all Modes to “punch-through” 

to any one chosen Mode for Volume/Mute button 

control without the needing to change to that 

Mode.

1.  Press and hold the 

SETUP

 button 

until the red indicator turns on, 

then release the button.

2.  Press and hold the 

MUTE

 button 

until the red indicator blinks off, 

then release the button.

3.  Press and release the desired 

Mode button (

TV

DVR

, etc.) for 

Volume/Mute control, the red 

indicator blinks then stays on.

4.  Press and release the 

MUTE 

button and the red indicator turns 

off. The red indicator will blink 

rapidly for three seconds if the 

Mode you have selected has no 

Volume/Mute control.  

All other Modes will now punch-through to your 

chosen Mode for Volume/Mute control.

  Using Your Remote, cont.

Summary of Contents for 24993

















Reviews: