background image

2

Congratulations on your purchase of the RM24918 

Universal Remote Control. The RM24918 is one 

of the most easy to use remote controls available 

today. With the RM24918, juggling multiple remote 

controls is a thing of the past! Your RM24918 

controls up to six devices, including the most 

popular brands of TV, VCR, DVD, SAT, CBL, and 

audio equipment. 

The RM24918’s 

BACKLIGHT 

button lights up the 

remote’s buttons, which stay lit until 5 seconds 

after you stop pressing buttons.

Note: Some functions from your original remote 

may not be controlled by this remote. Use the 

original remote, if available, to control such 

functions. Sometimes buttons other than described 

in these instructions may actually perform the 

function. For example, the CHAN and VOL 

buttons might be used to navigate through menu 

choices. We recommend you experiment with the 

remote to identify if such situations pertain to your 

equipment. 

  Table of Contents

Setup ..................................................................... 3

  Battery Installation ............................................ 3

  Battery Saver .................................................... 3

  Code Saver ...................................................... 3

  Code Setup ...................................................... 3

Button Functions.................................................... 4

  DVD Functions ................................................. 6

  SAT Functions .................................................. 7

Code Entry............................................................. 8

  Direct Code Entry ............................................. 8

  Code Search .................................................... 9

Using Your Remote.............................................. 10

  Code Identification

 .......................................... 10

  Controlling Devices with Power On and Off ... 11

  Controlling Combo Devices ............................ 11

  VCR/DVD/DVR Punch-Through ..................... 11

  Volume/Mute Control and Punch-Through ..... 12

  All Volume/Mute Control to any one Mode ..... 12

  Setting any Mode for its own Volume/Mute .... 13

Troubleshooting ................................................... 14

Summary of Contents for 24918 - Backlit Universal Remote

















Reviews: