GE 23151, User Manual

Page: 5 / 7

5
FINAL ASSEMBLY
1. To complete the installation, carefully slide
the mount with your display attached into
the wall plate (See Fig. 6). Do not release
the display until the mount is securely
placed in the wall plate. If you need to
remove the mount from the wall, carefully
slide the mount upwards and out of the
wall plate.
2. Tighten the set screw located on the upper
front portion of the wall plate using the S4
Allen Key (K) provided in the hardware kit
(See Fig. 7). Remember to remove the set
screw before attempting to remove the
mount from the wall plate.
**IMPORTANT**
The set screw should
be used at all times to
prevent the mount from
being accidentally lifted
from the wall.
3. Cables can be routed
through the hook
located at the bottom
of the wall plate to keep
them organized and
out of the way.
FIG. 6
FIG. 7
OPERATION AND
ADJUSTMENT
1. To adjust the tilt angle or rotate your
screen, fi rmly grasp the sides of you display
and carefully move it into position. If you
fi nd the mount is too diffi cult to move or is
too loose to hold your display in position,
adjust the three screws located directly
behind the head of the mount using the S4
Allen Key provided in the hardware kit (See
Fig. 8). Adjust all three screws evenly.
2. Swivel adjustments can be made simply by
moving your display to the desired position.
If any of the swivel joints are too tight or
too loose, they can be adjusted using the
S4 Allen Key provided in the hardware kit
(See Fig. 9).
3. Periodically clean your mount with a dry
cloth. Inspect all screws and hardware
at regular intervals to ensure that no
connections have become loose over time.
Re-tighten as needed.
FIG. 8
FIG. 9