background image

5

VOLUME UP/DOWN 

changes 

the volume level of the product, 

normally the TV.

CC (SUBTITLE)

 TV Closed 

Caption (if your TV has 

this feature) or DVD 

Subtitle toggle.

NUMBERS

 enter numbers for 

direct channel selection. Some

products require ENTER to 

be pressed after channel 

selection.

ON•OFF

 

Turns product 

On or Off.

MUTE 

Turns off the 

TV sound while the 

picture remains.

OK

 Selects menu items for the 

device you are controlling.

CHANNEL Up/Down

 Changes 

the channels 

TRACK +/-

  controls 

DVD/CD track selection i.e. DVD/

CD Track Skip Up/Down (in DVD 

and CD modes).  

RESUME, AUDIO, ZOOM, ANGLE, 
TITLE 

controls DVD functions.

  Button Functions, cont.

Note: The 

REC 

button must be pressed TWICE to record from your VCR. For some brands 

of VCRs, you might need to press the 

REC 

button once, then press it again for three 

seconds.

INFO/DISPLAY

 button brings up 

DVD Display or Control Menu for 

Chapter/Track/Title number, Time 

remaining/elapsed indication, 

system information, etc.

Turns 

Backlight

on and off.

Dot

 used for digital 

channels like 2.3.

Summary of Contents for 20309

















Reviews: