manualshive.com logo in svg

GE 2-920SST, User Manual, Page: 15 / 32

Share
Download
GE 2-920SST User Manual Download Page 15

15

D

IGITAL

 A

NSWERING

 O

PERATION

This section shows you how to set up your answering machine to receive
incoming calls.

• Press the ANSWERER ON/OFF button to
     turn the answering machine on and off.

The message count window lights when
the answering machine is on. The

window

blinks when you have new

messages.

The

message count and a broken line are
alternatively displayed when  Answerer

is OFF.

S

ETTING

 

THE

 V

OICE

 T

IME

/D

AY

 S

TAMP

1. Press and hold the TIME/SPEED button

until a beep is heard. Unit announces
“Enter the day of week followed by
hour and minute.”

2. Press       or       to set the day.

3. Press TIME/SPEED to confirm. The unit

will announce the hour.

4. Press       or       to set the hour (a.m. or

p.m.).

5. Press TIME/SPEED to confirm your

choice. The unit will announce the
minute.

6. Press       or       to set the minute.

7. Press TIME/SPEED to confirm your choice.

The day and time that you set is an-
nounced.

8.

  

Press and release TIME/SPEED button

to review the day and time settings.

TIME/SPEED

ANSWERER ON/OFF

ANNOUNCE

PLAY / PAUSE

ERASE

TIME/SPEED

ANSWERER ON/OFF

ANNOUNCE

TIME/SPEED

ANSWERER ON/OFF

ANNOUNCE

Summary of Contents for 2-920SST

































Reviews:

No comments