manualshive.com logo in svg

GE 2-900SST, User Manual, Page: 17 / 22

Share
Download
GE 2-900SST User Manual Download Page 17

17

Unit beeps and

• Place handset in base for 10 seconds to reset the

TALK light blinks

phone. If that doesn’t work, charge battery for 8 hours.

• Clean charging contacts on handset and base with a soft

cloth, or an eraser.

• See solutions for “No dial tone.”
• Replace battery.

Cannot place calls because

• You are receiving an out-of-range alert, move closer

TALK light continues to flash

to the base.

Cannot hear the

• Set the RINGER volume to LO or HI.

Page alert tone

Range is shorter

• Press the CHAN button during the conversation to select a

than normal

new channel.

• Position the base antenna upward.
• Check that the handset antenna is screwed in tightly.

Battery will not hold a

• Be sure you are sufficiently charging the battery. When the

charge OR is fully charged

battery  has been charged for 8 hours, you can expect

and the BATT LOW light

approximately 4 hours of talk time. You may want to

continues to blink.

consider purchasing an extra battery to provide you with the
convenience of always having a fully charged replacement
battery.

• Check to be sure battery contacts on both the handset and

the base are making contact and are clean; free of dirt or lint.

• When the handset is placed in the base, check that the base

CHARGE light is on.

BATT LOW light stays on

• Place handset in base for 10 seconds to reset the phone. If

that doesn’t work, charge battery for 8 hours.

Memory Dialing does not

• Did you program the memory location keys correctly?

work

See p. 12.

• Did you follow proper dialing sequence? See pp. 12-13.
• Make sure TONE/PULSE switch is correctly set.

See pp. 7-8.

Phone does not work

• Install a fully charged spare battery in the base charging

during a power failure

station.

Problem

Solution

Summary of Contents for 2-900SST























Reviews:

No comments