About the fresh food compartment shelves.
About the temperature control dial.
GEAppliances.com
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Full-Width Shelves
Some models have a stationary tempered
glass shelf, a spillproof shelf, or two steel
wire stationary shelves. These shelves can
be moved to another place in the fresh
food compartment.
When placed correctly on the shelf
supports, the shelf will stop before coming
completely out of the refrigerator and will
not tilt when you place food on it or remove
food from it.
Half-Width Shelves
One end of the shelf rests on a molded side-
wall support; a bracket on the other end
hooks into a track on the rear cabinet wall.
To remove, lift the shelf up at front, then off
the support and out of the track.
To replace, select desired shelf height. With
shelf front raised slightly, hook the bracket’s
top lug into the track, then lower the shelf
onto the support.
NOTE: The shelf to the right of the track is
designed to hook into the right-hand slot; the
shelf to the left is designed to hook into the
left-hand slot.
2 Lift up and out
1 Tilt up
To remove a full-width shelf when
the fresh food compartment door
cannot be opened fully
Lift rear
Pull forward and down
Lift rear
Pull forward
To remove the full-width shelves
5
Spillproof Shelves
(on some models)
Spillproof shelves have special edges
to help prevent spills from dripping
to lower shelves. To remove or replace
the shelves, see the above instructions.
Turning the dial to
0/ Off
stops cooling in both compartments—fresh food and freezer. It does not shut off power to the refrigerator.
Temperature Control Dial
(on some models)
The temperature control dial adjust refrigerator from warmest to coldest.
The recommended factory setting is shown in illustration to the left. For colder
temperature turn dial clockwise toward snowflake. For warmer temperature turn
dial counter clockwise away from snowflake. allow 24 hours for adjustment.
OFF
OFF
OFF
Recommened
factory setting
Coldest setting
Warmest setting
OFF
