IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS!
When using your flatiron, basic safety precautions should always be followed, including
the following:
This product is intended for household
use only.
This appliance is equipped with a polarized
plug. This type of plug has one blade wider
than the other. The plug will fit into an
electrical outlet only one way. This is a safety
feature intended to help reduce the risk of
electrical shock. If you are unable to insert
the plug into the outlet, try reversing the plug.
If the plug should still fail to fit, contact a
qualified electrician to replace the obsolete
outlet. Do not attempt to defeat the safety
purpose of the polarized plug by modifying
the plug in any way.
Use the iron on an ironing board. Ironing on
any other surface may damage that surface.
Consumer Safety Information
READ ALL INSTRUCTIONS BEFORE USING
1.
Use iron only for its intended use.
2.
Verify that the voltage in your home corresponds to that of your appliance.
3.
To protect against risk of electric shock, do not immerse the iron in water or other liquids.
4.
The iron should always be turned to OFF (
O
) before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
5.
Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.
Loop cord loosely around iron when storing.
6.
Always disconnect iron from electrical outlet when filling with water or emptying and when
not in use.
7.
Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To
avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer
assistance number for information on examination, repair or electrical or mechanical
adjustment. Incorrect reassembly can cause a risk of electric shock when the iron is used.
8.
Close supervision is necessary for any appliance being used by or near children. Do not
leave iron unattended while connected or on an ironing board.
9.
Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you
turn a steam iron upside down – there may be hot water in the reservoir.
SPECIAL INSTRUCTIONS
1.
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
2.
If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated
for less amperage may overheat. Care should be taken to arrange the cord so that it cannot
be pulled or tripped over.
2
840099800 Ev02 4/9/02 2:05 PM Page 2
