background image

Printed in Louisville, KY     

6-97   CG

Operating Instr

uctions

Installation Instr

uctions

Safety Infor

mation

Tr

oubleshooting T

ips

Customer Ser

vice

Service Telephone Numbers.

The GE Answer Center

®

is open 24 hours a day, 7 days a week.

GE Answer Center

®

800.626.2000

Expert GE repair service is only a phone call away. 

In-Home Repair Service

800-GE-CARES (800-432-2737)

TDD 800-TDD-GEAC (800-833-4322)

GE offers, free of charge, a brochure to assist in planning a barrier-
free kitchen for persons with limited mobility. 

Special Needs Service

800.626.2000

Purchase a GE service contract while your warranty is still in effect
and you’ll receive a substantial discount. GE Consumer Service will
still be there after your warranty expires. 

Service Contracts

800-626-2224

Individuals qualified to service their own appliances can have parts
or accessories sent directly to their homes (VISA, MasterCard and
Discover cards are accepted).

Instructions contained in this manual cover procedures to be performed
by any user. Other servicing generally should be referred to qualified
service personnel. Caution must be exercised, since improper servicing
may cause unsafe operation.

Parts and Accessories

800-626-2002

If you are not satisfied with the service you receive from GE, follow
these three steps. 

First, 

contact the people who serviced your

appliance.

Next, 

if you are still not pleased, write all the details—

including your phone number—to: Manager, Consumer Relations,
GE Appliances, Appliance Park, Louisville, KY 40225. 

Finally, 

if your

problem is still not resolved, write: 

Major Appliance Consumer Action Program 
20 North Wacker Drive, Chicago, IL 60606.

Service Satisfaction

Summary of Contents for 164D3333P069





























































Reviews: