GE 164D3333P034 Owner'S Manual Download Page 14

Page: 14 / 56

Using the surface units.

Operating Instr

uctions

Installation Instr

uctions

Safety Infor

mation

oubleshooting T

ips

Customer Ser

vice

Indicator Lights

(glass cooktops only)

HOT SURFACE

indicator light will glow when any

radiant element is turned on, and will remain on until
the surface is cool enough to touch.
A surface unit

indicator light will glow when

any

surface unit is on.

NOTE:

The surface unit

indicator light may glow between the

surface control settings of

and

OFF

, but there is no power to

the surface units.

OVEN
LIGHT

OFF

MED

OFF

MED

OFF

MED

OFF

MED

SURFACE
LIGHT

FRONT

REAR

FRONT

HOT SURFACE

OVEN TEMP

About the radiant surface units…

(glass cooktops only)

The radiant cooktop features heating units beneath a
smooth glass surface.

NOTE:

A slight odor is normal when a new cooktop is used for the

first time. It is caused by the heating of new parts and insulating
materials and will disappear in a short time.

The surface unit will cycle on and off to maintain

your selected control setting.
It is safe to place hot cookware from the oven or

surface on the glass surface when the surface is cool.
Even after the surface units are turned off, the glass

cooktop retains enough heat to continue cooking.

To avoid over-cooking, remove pans from the surface

units when the food is cooked. Avoid placing

anything on the surface unit until it has cooled

completely.

■

Water stains (mineral deposits) are removable using the cleaning
cream or full strength white vinegar.

■

Use of window cleaner may leave an iridescent film on the
cooktop. The cleaning cream will remove this discoloration.

■

Don’t store heavy items above the cooktop. If they drop onto the
cooktop, they can cause damage.

■

Do not use the surface as a cutting board.

,,,,

,,,,,,,,

,,,,,,,,,,,

,,,,,,,,,,

,,,,,,,

,,,

SURFACE

COOKING

Never cook directly on the glass.
Always use cookware.

OFF CENTER

Always place the pan in the center of
the surface unit you are cooking on.

Summary of Contents for 164D3333P034

























































Search results

Summary of Contents for 164D3333P034

Reviews:

Brands by name

Popular brands

GE 164D3333P034, Owner'S Manual

Search results

Summary of Contents for 164D3333P034

Reviews:

Brands by name

Popular brands