REVERSE HARDWARE ON CABINET
15
TRANSFER BOTTOM HINGE BRACKET TO THE LEFT.
a. Remove the base grille. Grasp it at the bottom
and pull it straight out.
b. Using a Torxdriver, remove the hinge bracket
and plastic washer from the bottom right side
of the cabinet.
c. Reinstall the hinge bracket and plastic
washer to the bottom left side of the cabinet.
1
TRANSFER CENTER HINGE BRACKET TO THE LEFT.
a. Remove the center hinge bracket by removing
the three Torx screws. NOTE: Keep these
screws with the hinge bracket. They are
longer screws and will be used when
installing the hinge on the other side.
b. Remove the three Torx screws from the center
left side of the cabinet. Screw them into the holes
on the right side, which were uncovered in Step
(a) above.
Place the center hinge bracket over the holes at the
center left side of the cabinet, insert the three
screws that were removed with the center hinge
bracket in Step (a) and tighten them.
2
TRANSFER TOP HINGE TO THE LEFT.
Interchange hinge and screws at top right with
screws at top left of cabinet. Do not tighten
screws on hinge side at this time.
3
TRANSFER DOOR STOPS.
a. On each door, move the metal door stop from
the right end to the left end.
b. Move any screws from the left end to the
right end.
4
Plastic Washer
Bottom Left
Center Left
Center Right
Do not remove this screw
Do not remove this screw
Bottom Right
Plastic Washer
(continued next page)
Summary of Contents for 162D7740P005
Page 20: ...NOTES 20 ...
