7
6
Customer Service
If you have a claim under this warranty, please call our Customer
Assistance Number. For faster service please have model, series,
and type numbers ready for operator to assist you. These num-
bers can be found on the motor housing of your electric knife.
MODEL : ___________ TYPE : ___________ SERIES : ___________
Customer Assistance Number: 1-877-556-0973
Keep this number for future reference!
E-mail inquiries: www.wal-mart.com
WARNING:
To reduce risk of personal injury, always disconnect
cord from electric outlet before inserting, removing or clean-
ing blades. Blades are sharp; handle carefully.
1.
Unplug cord from electric outlet.
2.
Firmly pull back blade release button. Grasp plastic guard
and carefully pull until blades release.
3.
Carefully separate blades by sliding apart to disengage rivet
from keyhole.
4.
Wash blades in hot, soapy water or top rack of dishwasher.
Rinse and dry thoroughly.
5.
After washing and drying, immediately place blades into the
protective sleeve for storage.
6.
To clean motor housing and cord, wipe with a damp cloth
and then dry thoroughly.
How to Disassemble and Clean
CAUTION:
Be sure cord is not connected to electric outlet when
removing or inserting blades and when knife is not in use. The
blades are extremely sharp. Always handle by the side opposite
the cutting edge, as illustrated, or by the plastic guards.
1.
If blades are separated, pick up
by the plastic guard. Slide the
rivet on one blade into the key-
hole slot in the other blade until
they are locked together.
2.
Holding blades together at the
base of the blade with cutting
edge down, slide onto motor
housing until both blades click into place. Make sure blades
match. The plastic guard at end of blade should be either all
WHITE or all GRAY.
3.
Plug cord into an electric outlet.
4.
Hold knife by handle. Pull On/Off button like a trigger to
operate. You must hold the button “On” for the knife to
operate.
5.
To stop, release button.
How to Assemble and Use
