GE 001C 051D 003A, Service Manual

Page: 106 / 282

Preventive maintenance: Cleaning, disinfecting and storing GE ECG cables and leadwires
5-8 Dash 3000/4000/5000 2000966-542D
Sterilization
NOTE
EtO sterilization is not recommended , but may be required for cables
and leadwires. Frequent sterilization will reduce the useful life of
cables and leadwires.
Sterilize with ethylene oxide gas (EtO) at a maximum temperature of 50°
C/122° F. After EtO sterilization, follow the recommendations from the
sterilizer manufacturer for required aeration.
Cautions

Never immerse the handheld device, cables, or leadwires in any
liquid.

Do not pour or spray any liquid directly on cables or leadwires or
permit fluid to seep into connections or openings.

Never use conductive solutions, solutions that contain chlorides, wax,
or wax compounds to clean handheld devices, cables or leadwires.

Never use solutions or products that contain the following:

Any type of Ammonium Chloride such as, but not limited to:
Dimethyl Benzyl Ammonium Chloride or Quaternary
Ammonium Chloride solutions

Abrasive cleaners or solvents of any kind

Acetone

Ketone

Betadine

Alcohol-based cleaning agents

Sodium salts

Never autoclave or steam clean cables or leadwires.
Storage

Store in a dry well-ventilated area.

Vertically hang cables and leadwires.

Do not coil leadwires or cables tightly around any medical device.
Improper cleaning products and processes impact or results

Product discoloration

Metal part corrosion

Brittle wires

Brittle and breaking connectors

Reduced cables and leadwires life

Unit malfunction

Void warranty