GE Security StoreSafe Manual Download | Manualshive

Page: 25 / 81

background image

0150-0229E

25

GE Security DVMRe StoreSafe

ATM/POS Text Display

Pressing the Camera Number a third time displays an ATM/POS text display. This feature can be
used during live viewing mode to verify that StoreSafe is receiving ATM/POS text, or in Playback
mode to review recorded text and video.

This feature is not available in the standard model.

2.10 Triplex Mode

Triplex mode allows the display of both live and playback images to appear on Monitor A
simultaneously. Live images have gray borders, while playback images have black borders.

To enter triplex mode, press the Play Forward button while in Play Forward mode. Alternatively, press
the Play Reverse button while in Play Reverse mode. Both the Play Forward LED and the Stop LED
turn on to indicate that the unit is in triplex mode.

Monitor B always displays a fullscreen live display whenever triplex mode is entered.

Play Forward

When in Play Forward mode and the Play Forward button is pressed, the unit will
enter the triplex mode of operation. When Play Forward is pressed again, the unit
will revert back into the normal Playback mode. While in the triplex mode, if
reverse play is in progress, the Play Forward button will change the playback
direction.

Play Forward

Button

Reverse Play

When in Reverse Play mode and the Reverse Play button is pressed, the unit will
enter the triplex mode of operation. When Reverse Play is pressed again, the unit
will revert back into the normal Playback mode. While in the triplex mode, if
forward play is in progress, the Reverse Play button will change the playback
direction.

Reverse Play

Button

Fast Forward

During triplex mode, rotate the

Shuttle

(the outer dial) clockwise to view playback

images at a higher than normal rate. Increasing the amount of rotation increases
the rate of playback. Live images are not affected.

Jog / Shuttle

Rewind

During triplex mode, rotate the

Shuttle

counter-clockwise to view playback

images (in reverse) at a higher than normal rate. Increasing the amount of
rotation increases the rate of playback. Live images are not affected.

Freeze

During triplex mode, pressing the

Freeze

button pauses all multiscreen images,

both Live and Playback.

Freeze Button

Single Frame Advance & Single Frame Rewind

During Freeze or Pause mode, rotate the

Jog

(the inner dial) to view the frame

directly before or after the frame displayed on-screen. Only the playback images
are affected.

«
...
23
24
25
26
27
...
»

Summary of Contents for StoreSafe


















































































Reviews:

No comments

Related manuals for StoreSafe

Brand: dallmeier Pages: 75

Brand: 247Security Pages: 13

mDVR 500 Series

Brand: 247Security Pages: 11

Brand: G-Lenz Security Pages: 68

Brand: Channel Vision Pages: 51

Brand: Pivothead Pages: 20

Brand: Magnavox Pages: 2

Brand: Safety Vision Pages: 14

Brand: Prestigio Pages: 175

Brand: CCTvstar Pages: 174

Brand: Partizan Pages: 67

VT-SRE Spire Elite

Brand: Vitek Pages: 150

ShowView VPH6920F

Brand: THOMSON Pages: 34

Brand: EUROSTYLE Pages: 4

Brand: Appro Pages: 47

Brand: Appro Pages: 87

Brand: ECOLINE Pages: 27

Brand: Planet Networking & Communication Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands