Chapter 2: Hardware Installation
Installation
To connect the hardware, do the following:
1.
Connect a standard network cable from "EDC" of MS-POE to
"EDC" of SP-PoE. The POE LED of SP-PoE/MS-POE will start to
flash continuously.
Figure 3 MS-PoE/SP-PoE application
Note:
The SP-PoE only accepts IEEE 802.3af equipment. Other in-line power
devices may cause the SP-PoE to malfunction.
2.
Connect the UTP cable in the package from "Ethernet" of SP-PoE to
the RJ-45 port of remote device.
3.
Connect proper DC plug from "DC OUT" of SP-PoE to remote device.
Caution:
Please ensure the output voltage is correct for remote device.
Otherwise, it will damage your remote device.
4.
Power on the remote device and the LED indicator on SP-PoE will
remains on.
SP-PoE Splitter User Manual
9
