HiTech Handheld Wireless Touchpad
Page 3
5. Press and hold each panic button for two sec-
onds, until the red/green indicator light stops
flashing and the appropriate alarm sounds.
6. To mute the touchpad: press the
1
and
2
but-
tons at the same time, until you hear confir-
mation beeps.
Press various buttons to test the mute feature.
7. Turn off mute by pressing the
1
and
2
buttons
at the same time, until you hear confirmation
beeps.
8. Turn all lights on or off by pressing
COM-
MAND
+
0
with the Security Pro 2000 or by
pressing
LIGHTS-ON
or
LIGHTS-OFF
twice
with the Security Pro 4000.
9. Turn individual lights on or off with the
Security Pro 4000 by pressing
LIGHTS-ON
or
LIGHTS-OFF
+ [unit number]. Unit numbers
range from 1 to 9.
Note:
Refer to the appropriate
Owner’s Manual
for
instructions on using the touchpad with a specific
panel.
Specifications
Battery Power Supply: 3.0 VDC lithium battery
(operating life: 5-8 years). Use either a Duracell
®
DL123A, Eveready
®
EL123A, Panasonic
®
CR123A, or
Sanyo
®
CR123A.
Note:
The 5-8 year battery life has not been verified by UL
.
Operating Temperature Range: 10° to 120°F
(-12.2° to 49°C)
Dimensions: 6.1” L x 2.1” W x 0.86” H
(15.49 cm x 5.33 cm x 2.18 cm)
Compatibility: All Learn Mode panels, including:
CareTaker
®
Plus, Concord, Commander 2000™
, and SX-
V Special.
Note:
The HiTech Touchpad controls lights differently
with various panels and software versions (see
Table 1).
Table 1. Touchpad Light Control
Panel
COMMAND
+ 0
Light Buttons
On
Off
On/Off + n
Care-
Taker
Plus 3.0
✓
✓
✓
✓
*
Care-
Taker
Plus
1.0—2.1
✓
✓
†
Com-
mander
2000 4.0
✓
Concord
✓
✓
✓
✓
SX-V
Special
✓
✓
†
*
Pressing the LIGHTS-ON and LIGHTS-OFF but-
tons followed by a unit number n controls the lights
assigned to unit number n. Unit numbers range
from 1 to 9.
†
Pressing the LIGHTS-ON button toggles all lights
on or off, the same as pressing COMMAND + 0.
