2-2
T-2100 Treadmill
2021403-026B
T-2100 Treadmill Overview
Intended Use
The T-2100 Treadmill is intended for use with any of the several GE
Medical Systems
Information Technologies
exercise testing systems or
the MTC-1 (manual treadmill controller), for administering a controlled
exercise load during a diagnostic stress test. Standard features include
the emergency stop switch, a full handrail set, and a long, 60-inch
walking surface.
The emergency stop switch is intended for emergency situations where
immediately stopping the treadmill is required to deliver appropriate
emergency care to the patient or health care provider, as implied by the
American Heart Association “Guidelines for Clinical Exercise Testing
Laboratories” (1995). It is not intended for routinely stopping the
treadmill.
Preparation for Use
Safe Handling Guidelines
The T-2100 Treadmill ships preset with an approximate 2% grade. This
slight elevation provides for free wheel movement and prevents the
shroud from scraping the floor.
Before moving the treadmill after it has been in operation, use the
controlling equipment to set the grade to approximately 7%. Then
remove power and disconnect all cables to the treadmill before moving
the unit.
Follow the steps below to move the treadmill. We recommend that two
people work together since the treadmill may be too heavy for some
individuals to lift and lower safely.
NOTE
We recommend the treadmill not be placed on carpet or carpet tile
floors as a final location, as continual movement of the wheels may
eventually damage the carpet and possibly the treadmill.
Summary of Contents for T-2100
