GE MDS MDS iNET-II 900, Reference Manual

Page: 111 / 190

05-2806A01, Rev. H iNET Series Reference Manual 101
taken off-line until you want to operate the unit from the newly installed
firmware image.
Firmware images are available free-of-charge at:
www.GEmds.com/service/technical/support
NOTE: GE MDS iNET firmware may not be installed in GE MDS
iNET-II radios, or vice-versa.
NOTE: When upgrading to firmware 6.0.0 or later, the unit creates
internal files following the first reboot. This one-time process
delays the response of the HTTP interface for 5-10 minutes. If
DC power is cycled (turned off and back on) during this
process, the files will have to be created again. It is recom-
mended that you wait until this 5-10 minute process is
complete before verifying operation of HTTP, HTTPS, or
SSH.
NOTE: Always read the release notes for downloaded firmware. Some
versions may not be compatible over the air, or with the partic-
ular unit you have.
Figure 2-63. Reprogramming Menu
(Shown with “Image Copy” Selected)
•
TFTP Host Address
—IP address of the host computer from which
to get the file. [
Any valid IP address
] This same IP address is used
in other screens/functions (reprogramming, logging, etc.).
Changing it here also changes it for other screens/functions.
•
Filename
—Name of file to be received by the TFTP server.
[
Any 40-character alphanumeric string
] Verify that this corresponds
to the TFTP directory location. May require sub-directory, for
example:
\ fi rmware\inet\inet-4_4_0.ipk
.