GE MDS MDS iNET 900, Reference Manual

Page: 120 / 190

110 iNET Series Reference Manual 05-2806A01, Rev. H
NOTE:
The filename is case sensitive.
3. Perform the fi rmware download.
2.9.6 Radio Test Menu
Using this menu, you can manually key the radio transmitter to make
measurements of antenna performance. (See
“ Antenna Aiming” on
Page 141 for details.)
Figure 2-69. Radio Test Menu
Shown with Test Mode set to ON
NOTE :
Use of the Test Mode will disrupt traffic through the radio. If
the unit is an Access Point, it will disrupt traffic through the
entire network.
Test Mode function is automatically limited to 10 minutes and
should only be used for brief measurement of transmit power .
It may also be manually reset to continue with the testing or
turned off.
•
Test Mode
—Controls access to the transceiver’s suite of tools.
[
ON, OFF; OFF
]
•
Frequency
—Set radio operating frequency during the testing
period to a single frequency. [
915.0000 MHz
]
•
TX Output Power
—Temporarily overrides the power level set-
ting in the Radio Configuration Menu. [
20
]
•
TxKey
—Manually key the radio transmitter for power mea-
surements. [
Enable, Disable; Disable
]