SKU
L-TQ-
Input Voltage
120V
Frequency
60Hz
All trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory
conditions. Current, powered by GE is a business of the General Electric Company.
© 2017
www.currentbyge.com, www.gelighting.com
IND414 (Rev 09/20/17)
Fixture Installation
Hold the adapter below the track
with your thumb on the locking
tab. Make sure the locking tab
is positioned directly below the
polarity line. Push adapter into
track.
Rotate adapter 90 degrees
clockwise, making sure the
polarity lines match between the
Release the locking tab and the
2
3
1
Locking tab
Locked
Rotate
Track
Polarity line
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005 (A) / NMB-005 (A)
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Fixture intended for commercial use only. Use only in non-insulated applications.
