Installing the CyberScout
CyberScout User Manual
22
1038864A / December 2002
2.5.2 W
ALL
-M
OUNT
A
DAPTER
See Figure 21 and perform the following:
1)
Plug the RJ45 interconnect
cable into the top of the
pan/tilt assembly.
2)
Carefully place the interface
module and its connected
cabling into the wall-mount
adapter while raising the
pan/tilt assembly.
3)
Align the pan/tilt assembly
with the adapter so that the
camera’s orientation marks
( ) face toward the center of
the desired pan arc and away
from the wall. The marks are
located on the pan/tilt
raceway.
4)
Place the pan/tilt assembly in
the wall-mount adapter and
secure it with three machine
screws (provided).
Figure 21. Securing the pan/tilt assembly
