GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 93 / 226

RR Analysis
5. Press Save to record your settings.
6. Continue with “Acquiring a Recording for an RR Analysis Report” on page 93 .
Acquiring a Recording for an RR Analysis Report
1. Press Start Test .
The device begins to acquire the ECG. The target beats, acquired beats, and
acquired time are updated in real time on the screen.
2. While the ECG is being acquired, you can do any of the following:
• Change the Speed .
• Change the Gain .
• Change Low Pass Filter .
• Toggle Pace Enhancement .
For more information on any of these options, see “RR Analysis Setup” on page
89 .
When the target is achieved, the system automatically stops, and displays a
preview of the summary results, histogram, trendgram, and output options.
3. While reviewing the preview, execute one of the output options described in
“Output Options” on page 93 .
Output Options
The following options are available after the RR Analysis test completes:
Output Options
Option Description
Press Return .
Discards the reading and returns to pre-test status.
Repeat the steps in “Acquiring a Recording for an RR Analysis
Report” on page 93 .
Press Main Menu . Discards the reading, exits the RR Analysis mode, and returns to
the
Main Menu .
Press Print .
Accept the reading and prints the RR Analysis Report on the
thermal printer.
PDF Export
Accepts the reading and exports the RR Analysis Report to a PDF
file.
2053535-002K MAC™ 2000 93