GE HEALTHCARE MAC 2000, Operator'S Manual

Page: 116 / 226

System Configuration
Basic Setup Fields–System Settings (cont'd.)
Field
Comment
Disable Wireless When in Standby
mode Determines whether the wireless function is disabled
while the device enters the
standby mode. It is
disabled by default.
NOTE:
If the embedded wireless module is installed, this
option is disabled and cannot be enabled.
Auto Standby Time (1–255 min) Identifies the amount of time, in minutes, that the
device can remain inactive before it enters
standby
mode. Auto Standby uses this field.
The default value is 5 mins.
Basic Setup Fields–System Security Setup
Field
Comment
High Security Mode When High Security Mode is enabled, users are
prompted to enter an ID and password when logging
on to the system. You must add each user in
User
Setup .
Audit Trail Copies the system audit trail in XML format to an SD
card and then clears the audit trial on the system.
For more information see
“Exporting the Audit Trail”
on page 171 .
Auto Logoff Determines whether the system automatically logs
the user off after a predefined period of inactivity.
See also Auto Logoff Time . This is available only if
High Security Mode is enabled.
Auto Logoff Time (1–255 min) Determines the length of inactivity, in minutes, before
the system logs off the user. This is available only if
High Security Mode is enabled.
116 MAC™ 2000 2053535-002K