GE HEALTHCARE E-PSMP, Technical Manual

Page: 268 / 622

Module Frames and Modules
8 - 18
2062973-004
3 Maintenance and checkout
To help ensure the equipment remains in proper operational and functional order, adhere to a
good maintenance schedule.
WARNING Only perform maintenance procedures specifically described in the manual.
WARNING Planned maintenance should be carried out annually. Failure to implement
the recommended maintenance schedule may cause equipment failure and
possible health hazards.
CAUTION Do not apply pressurized air to any outlet or tubing connected to the module.
Pressure may destroy sensitive elements.
NOTE: The manufacturer does not, in any manner, assume the responsibility for performing the
recommended maintenance schedule, unless an Equipment Maintenance Agreement exists.
The sole responsibility rests with the individuals, hospitals, or institutions utilizing the device.
Corrective maintenance
Service personnel shall perform the following checkout procedure after any corrective
maintenance, before taking the module back into clinical use:
Planned maintenance
Service personnel shall perform the following checkout procedure completely every 12 months
after installation:
1.
3.1. Replacement of planned maintenance parts
2. 3.2. Visual inspections
3. 3.3. Functional check
General warnings
This symbol is identified by a yellow background, black triangular band,
and a black symbol.
General cautions
This symbol is identified by a white background, black triangular band, and
a black symbol.
Performed service activity
Required checkout procedure
Visual inspections
(section 3.2) Functional check
(section 3.3)
Front panel replacement All steps Check “Module Keys” only
OM Reference gas filter
assembly All steps Check “Sample Flow Rate Check”
Module case opened either for
troubleshooting purpose or for
replacing any of the internal
parts. All steps All steps