manualshive.com logo in svg

GE HEALTHCARE Biacore T100, Handbook

The GE HEALTHCARE Biacore T100 Handbook is an essential manual for users of this cutting-edge biomedical research tool. Obtain expert guidance and instructions with this free download, exclusively available at manualshive.com. Enhance your research capabilities with confidence and ease, courtesy of this comprehensive user manual.

Share
Download
background image

Biacore T100 Software Handbook BR-1006-48 Edition AE

55

Application wizards 4

Check 

1st cycle

 to include the starting values derived from the first sample cycle 

in the plot. (This cycle is shown as cycle number 2 or 3: conditioning and startup 
cycles are numbered but not shown.)

Select which conditions to display in the 

Conditions

 box. Use Shift-click to make 

multiple adjacent selections, Ctrl-click to make multiple non-adjacent 
selections. The scale of the display will be adjusted according to the number of 
cycles displayed.

Select which curves to display in the 

Sensorgram

 box.

The 

Sensorgrams

 tab shows the sensorgrams for regeneration scouting. Select 

the conditions and cycles to display in the respective boxes. Check 

Zoom lock

 to 

keep the scale fixed when the choice of sensorgrams is changed.

Result files from regeneration scouting can also be opened in the Evaluation 
Software if you want to prepare other sensorgram displays or plots (see 
Chapter 7). See the Biacore Sensor Surface Handbook for a discussion of how to 
interpret the results of regeneration scouting.

4.4.2

Buffer scouting

The 

Buffer Scouting

 wizard helps you to test the effect of up to four different 

buffers on your assay, using the buffer selector valve to switch running buffers.

Step 1. Injection sequence

Choose the detection settings, chip type and injection sequence for the buffer 
scouting (see Section 4.2.1). The flow path can either be chosen explicitly (in 
which case the same flow path will be used for each buffer), or set to vary with 
the buffer (in which case a single flow cell will be used for each buffer, with flow 
cells 1, 2, 3 and 4 for buffers A, B, C and D respectively).

Summary of Contents for Biacore T100















































































































































































































































Reviews:

No comments

Related manuals for Biacore T100

Taylor Made 12008 Instructions preview
12008
Brand: Taylor Made Pages: 2
York Fitness 1003 Assembly Instruction Manual preview
1003
Brand: York Fitness Pages: 18
Safco 1005 Instructions preview
1005
Brand: Safco Pages: 2
Omni 4000 Series Operation & Maintenance Manual preview
4000 Series
Brand: Omni Pages: 193
ParaBody 855 User Manual preview
855
Brand: ParaBody Pages: 5
Sagola 6110 Instruction Manual / Spare Parts List preview
6110
Brand: Sagola Pages: 20
Earmor C51 Quick Start Manual preview
C51
Brand: Earmor Pages: 5
Keithley S530 Diagnostic Manual preview
S530
Brand: Keithley Pages: 67
Keithley S530 Option Manual preview
S530
Brand: Keithley Pages: 23
Keithley S530 User Manual preview
S530
Brand: Keithley Pages: 93
Oki APR-5000 User Manual preview
APR-5000
Brand: Oki Pages: 44
Magnescale MJ100 Manual preview
MJ100
Brand: Magnescale Pages: 64
dbx 911 Instruction Manual preview
911
Brand: dbx Pages: 12
dbx QUANTUM Application Manual preview
QUANTUM
Brand: dbx Pages: 13
dbx 1066 Operation Manual preview
1066
Brand: dbx Pages: 72
dbx AFS224 Quick Start Manual preview
AFS224
Brand: dbx Pages: 11
dbx 566 Owner'S Manual preview
566
Brand: dbx Pages: 16
dbx 231 Specifications preview
231
Brand: dbx Pages: 2

Brands by name

Popular brands

Load more brands