manualshive.com logo in svg

GE HEALTHCARE Biacore T100, Handbook

The GE HEALTHCARE Biacore T100 Handbook is an essential manual for users of this cutting-edge biomedical research tool. Obtain expert guidance and instructions with this free download, exclusively available at manualshive.com. Enhance your research capabilities with confidence and ease, courtesy of this comprehensive user manual.

Share
Download
background image

Biacore T100 Software Handbook BR-1006-48 Edition AE

113

Evaluation software – general features 6

6.6

Keywords

Keywords are assigned to cycles when the run is performed, and are then used 
for identification and evaluation purposes. Keywords are created automatically 
for wizard-based runs and may be defined in the method for method-based 
runs, and include:

•

automatically generated identifiers such as cycle number or assay step 
purpose,

•

method variables and predefined evaluation variables such as sample 
name, concentration and molecular weight,

•

user-defined variables (see Section 5.6.2).

You can add and remove user-defined keywords in the evaluation software, and 
edit the contents of certain keywords. Choose 

Tools:Keyword Table

 to open the 

keyword table. When you save changes to the keyword table, all user-defined 
items in the evaluation session will be deleted. Save the session before editing 
the keyword table if you do not want to lose your work. Click 

Cancel 

in the 

Keyword Table

 dialog to close the dialog without applying changes and 

deleting user-defined evaluation items.

To simplify management of the keyword table, you can sort and filter the table 
display:

•

Click on a column header to sort the table by the contents of that column.

•

Click in the filter row (directly below the column header) and select a value 
to display only rows with that value for the chosen column. Click 

Reset All 

Filters

 to restore all filters to the 

[All]

 setting. 

Summary of Contents for Biacore T100















































































































































































































































Reviews:

No comments

Related manuals for Biacore T100

Raymarine P70 User Reference preview
P70
Brand: Raymarine Pages: 70
Harbor Freight Tools 40052 Operating Instructions preview
40052
Brand: Harbor Freight Tools Pages: 4
Nektar Aura Setup And User Manual preview
Aura
Brand: Nektar Pages: 3
Youkey Q7 Instructions For Use Manual preview
Q7
Brand: Youkey Pages: 86
EAW UX8800 Quick Start Manual preview
UX8800
Brand: EAW Pages: 2
abc 907 Instructions For Use Manual preview
907
Brand: abc Pages: 28
Taylor-Wharton XL Series Instructions Manual preview
XL Series
Brand: Taylor-Wharton Pages: 25
i-CAT FLX V Series User Manual preview
FLX V Series
Brand: i-CAT Pages: 96
M-Audio X-Session Pro User Manual preview
X-Session Pro
Brand: M-Audio Pages: 12
M-Audio USB OMNISTUDIO Manual Del Usuario preview
USB OMNISTUDIO
Brand: M-Audio Pages: 64
M-Audio Pro Tools User Manual preview
Pro Tools
Brand: M-Audio Pages: 16
M-Audio ProjectMix I/O Quick Start Manual preview
ProjectMix I/O
Brand: M-Audio Pages: 4
M-Audio Delta 1010 Manual preview
Delta 1010
Brand: M-Audio Pages: 52
MacDon FlexDraper FD2 Series Quick Start Manual preview
FlexDraper FD2 Series
Brand: MacDon Pages: 2
M-Audio OXYGEN PRO MINI Quick Start Manual preview
OXYGEN PRO MINI
Brand: M-Audio Pages: 56
Goobay 49873 User Manual preview
49873
Brand: Goobay Pages: 6
Oase LUNAQUA Classic LED Operating Instructions Manual preview
LUNAQUA Classic LED
Brand: Oase Pages: 16
Eaton CA04801001E Catalog preview
CA04801001E
Brand: Eaton Pages: 38

Brands by name

Popular brands

Load more brands