manualshive.com logo in svg

GE HEALTHCARE Biacore T100, Handbook

The GE HEALTHCARE Biacore T100 Handbook is an essential manual for users of this cutting-edge biomedical research tool. Obtain expert guidance and instructions with this free download, exclusively available at manualshive.com. Enhance your research capabilities with confidence and ease, courtesy of this comprehensive user manual.

Share
Download
background image

Biacore T100 Software Handbook BR-1006-48 Edition AE

109

Evaluation software – general features 6

Gridlines

Shows or hides major and minor gridlines in the display window.

Legend

Shows or hides a legend for the display window. Choose the legend placing from 
the dialog box. In sensorgram and plot windows, the legend corresponds to the 

Color by

 setting for the display.

6.4

Predefined evaluation items

When a result file is opened, a number of evaluation items are created 
automatically if the results contain the appropriate cycles and report points. 
This section describes the items created for all result files: special items are also 
created for certain wizard runs (see Chapter 4).

6.4.1

Sensorgram

An overlay plot of all sensorgrams is created and opened. The sensorgrams are 
not aligned, and are colored by assay step.

6.4.2

Plots

Plots are created for most wizards if the appropriate report point is present in 
the results. Common predefined plots are listed below. Separate plots will be 
created if there are multiple injections with similar report points (for example 
baseline for capture and sample injections). The 

Plot Settings

 cannot be 

changed, but the plot can be modified using the selectors and the 

Tools

 menu 

(see Section 7.2). Note that changing the selector settings can sometimes defeat 
the purpose of the plot. 

Baseline: Sample

Absolute response for report point 

baseline 

against cycle number. 

Baseline: Capture

Absolute response for report point 

capture_baseline 

against cycle number. 

Baseline: General

Absolute response for report point 

general_baseline 

against cycle number. 

Binding to reference

Relative response for report point 

stability

 

against cycle number for the reference flow 
cell.

Capture

Relative response for report point 

capture_level

 against cycle number for the 

capture injection.

Summary of Contents for Biacore T100















































































































































































































































Reviews:

No comments

Related manuals for Biacore T100

Odom ES3 Hardware Configuration preview
ES3
Brand: Odom Pages: 19
MacDon M205 Installation Instructions Manual preview
M205
Brand: MacDon Pages: 30
Barreto 20RTK Operator'S Manual preview
20RTK
Brand: Barreto Pages: 20
Backyard Discovery Premier Series Manual preview
Premier Series
Brand: Backyard Discovery Pages: 41
Pari Trio Instructions For Use Manual preview
Trio
Brand: Pari Pages: 12
laerdal SimPad PLUS Wi-Fi Setup preview
SimPad PLUS
Brand: laerdal Pages: 2
laerdal SimPad PLUS Important Product Information preview
SimPad PLUS
Brand: laerdal Pages: 104
laerdal SimPad User Manual preview
SimPad
Brand: laerdal Pages: 33
laguna POWER CLEAN Operation And Maintenance Manual preview
POWER CLEAN
Brand: laguna Pages: 16
Lafayette LL-15 User Manual preview
LL-15
Brand: Lafayette Pages: 2
Vatech Smart Plus PHT-35LHS Technical Manual preview
Smart Plus PHT-35LHS
Brand: Vatech Pages: 190
Yamaha EAD10 Firmware Update Manual preview
EAD10
Brand: Yamaha Pages: 4
Garrick RG6C Manual preview
RG6C
Brand: Garrick Pages: 8
SAC MINI-LED Technical Data preview
MINI-LED
Brand: SAC Pages: 2
BRAND Micro-classic Operating Manual preview
Micro-classic
Brand: BRAND Pages: 21
Milestone 370635 Operator'S Manual preview
370635
Brand: Milestone Pages: 40
Phonic Firefly 808 Universal User Manual preview
Firefly 808 Universal
Brand: Phonic Pages: 27
My-Doc DocLaser Sport Quick Reference Manual preview
DocLaser Sport
Brand: My-Doc Pages: 32

Brands by name

Popular brands

Load more brands