- 19 -
Warning
*
Don’t mix to use old and new batteries
*
be careful the polarity is correct when installing batteries
*
Do not use the meter if the battery indicator show a battery empty
conditions
*
Do not carry out measuring during the battery cover is open
Figure 6
Follow figure 6 and proceed as follows:
1) Turn the meter to OFF and remove all connections from the terminals
2) Remove the screw from the battery cover, separate it from the case bottom,
replace the batteries
3) Rejoin the case bottom and battery cover and reinstall the screw
Ⅸ
How to use power adaptor
Open the side safety shutter, then you will see there is a power adaptor input
terminal,make sure the meter is power off and insert the power adaptor to the
