5
Signal = Blue connector, pin 69
Ground = Blue connector, pin 49
GDP Wires
Signal = Purple
Ground = Black
Step 5
It will now say “Turn ignition on, Do Not Start”……your vehicle is already in the run posi-
tion, so just hit “Continue” at the bottom. (insert image #0076)
Step 6
On this next screen, hit the “Save Stock Cal” button. (insert image #77) The screen will
switch again and start reading your Factory Program and saving it to the device. This
process will take up to 20 minutes as is saves your Engine file first (ECM) and then
Transmission file second (TCM). (insert image #0080 & #0081) If by chance you have a
newer vehicle model that hasn’t had the strategy loaded to the latest software version,
you will get an error after Step#5 that will tell you your vehicle is not support. If this
happens, please email us at [email protected] with the vehicles’ VIN#, modifica-
tions, and the device’s Serial#, which can be found under “Module Info” on the startup
screen. (insert image #0079) From there we will check to see if your vehicle is support-
ed, and if it is, we will send an update to your device, which will be activated by unplug-
ging it from your computer & plugging it back in, then hitting Update.
