Instrumentation GDD Inc. 2018-11-09
31
It is possible to take readings by using three different methods with the MPP-EM2S+. These methods
are
Punctual
,
Continuous
and
Single Reading
modes.
9.1
Punctual mode
In this mode, each time you click
MEM
button in the GDD MPP software or you press
MEM
button on
the probe, one reading is stored in the current project. This reading is associated to the selected
Core
and taken at the current
Depth
position. If the current
Spacing
is not
0
, the current
Depth
is
incremented by the value of
Spacing
and the next reading will be stored at this
Depth
position.
9.2
Continuous mode
In this mode, the readings are recorded automatically according to the recording time interval you need
(0.1 s, 0.2 s, 0.5 s, 1.0 s, 2.0 s, 5.0 s). By clicking
MEM
button in the GDD MPP software or pressing
MEM
button on the probe you START or STOP recording readings. To mark the positions, you click
STAMP
button in the GDD MPP software or press
STAMP
button on the probe. The readings are associated to
the selected
Core
and equally distributed between
Depth
positions marked by
STAMP
. Each time you
make a
STAMP
, the
Depth
is incremented by the value of
Spacing
if it is not
0
.
9. Reading Modes
