4
Thank you for purchasing a GDC Digital Cinema Server SX-2000(A/T)R with NEW
Integrated Media Block from GDC Technology Limited.
To upgrade SX-2000 to SX-2000(A/T)R server with NEW Integrated Media Block, please review this Upgrade
Manual.
COPYRIGHT NOTICE
Copyright © 2012 by GDC Technology Limited
All rights reserved. No part of this manual may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or
translated into any human or computer language, in a form or by any means, electronic, mechanical, photocopying, recording,
magnetic, optical, manual or otherwise, or disclosed to third parties without prior written permission of GDC Technology Limited.
MANUAL DISCLAIMER
This manual is made with SMS version 9.0 and there might be slight differences depending on the software version the server is
running. The contents, features and specifications stated in this manual are subject to change without notice due to continuous
product development and improvements. In no other event shall GDC Technology Limited be liable for any loss of profit or any
other commercial damages, including but not limited to special, consequential, or other damages.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SOFTWARE LICENSE & SOFTWARE MANUAL AGREEMENT
1.
This is an agreement between “GDC Technology Ltd, (“Licensor”) and user (“Licensee”), who is being licensed to use the
upgrade software referred to herein (“Software”) and software upgrade manual (“Manual”).
2.
Licensee acknowledges that this is only a limited nonexclusive license. Licensor is and remains the owner of all titles, rights,
and interests in the Software and Manual.
3.
This License permits Licensee to install the Software on GDC genuine digital cinema servers that are either owned by the
Licensee or maintained by the Licensee under a service contract with the server owner. Licensee will not make copies of the
Software or Manual, nor allow copies of the Software or Manual to be made by others, without the prior written consent of
Licensor. Licensee may make copies of the Software and Manual for the purpose of assisting the upgrade process itself,
however all such copies should be destroyed at the end of the upgrade process.
4.
THE SOFTWARE AND MANUAL ARE EACH PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. LICENSOR MAKES NO REPRESENTATIONS AS TO
PERFORMANCE, ACCURACY, COMPLETENESS, CORRECTNESS, SUITABILITY OR VALIDITY OF THE SOFTWARE
AND INFORMATION CONTAINED IN THE SOFTWARE UPGRADE MANUAL. IN NO EVENT SHALL LICENSOR BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE OR SOFTWARE UPGRADE MANUAL.THE ABOVE-STATED LIMITED WARRANTY.
REPLACES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND LICENSOR DISCLAIMS ALL IMPLIED.
5.
In the event of any defect in the Software, Licensee's exclusive remedy is as follows: Licensee will return all copies of the
Software to Licensor, at Licensee's cost, and Licensor will send Licensee a replacement copy of the Software.
