- 158 -
01 Aug 2018
User Manual for LPU-1000 LED Player Unit
7. APPENDIX
1
[UDP Multicast]
[Multicast Group address]
[Multicast port]
This section will configure the network stream parameters.
IP Address of streaming source
Port of the streaming source related to the IP address
2
[Video PID]
[Audio PID]
[Subtitle PID]
[Video Type]
[3D Demux]
[Audio Type]
[AC3 output on
channels]
[PTS Sync]
Video, Audio and Subtitle PID are usually provided by the broadcaster. If the video or audio
PID is set to
‘0’, the LPU-1000 will automatically search and play back the last video or audio
stream found in the network system.
Check Force PID box to ensure the LPU-1000 to use the provided PIDs. Note: having the
values set to
‘0’ will cause errors in receiving the network stream when the Force PID box is
checked.
Choose between MPEG2 and H.264 (MPEG4) or Auto-Detect.
Select whether to apply 3D demux to incoming video stream. None (2d): 2D video output;
Side-by-side (3D): 3D video output with side-by-side 3D demux
Audio Type can be automatically detected, or you may choose either AC3 or MPEG2,
depending on the exact audio format delivered by streaming content
AC3 audio output from LPU-1000 will pass-through as a digitally compressed audio system
to an external audio processor. Select a pair of LPU-1000 audio output channels to send this
pass-through compressed audio system
Setting the
“PTS sync” configuration option will force playback to use the Presentation
TimeStamp (PTS) header in the IP stream to synchronize audio and video playback.
(Recommended: unchecked)
Note: Selecting this option will use a new mechanism to sync audio and video playback.
Check this option only if the default, unchecked option fails to achieve proper audio and
video sync.
