TeleCraft
™
TC-125 User’s Guide
Last updated: Jan. 2008
Notes
1. Consult the User’s Manual for additional information
regarding blind and supervised transfers.
2.
Use code 191 to prevent hearing ringing lines. Do not
lower the speaker volume since you will not be able to
hear anybody who initiates a hands-free conversation.
3.
Use code 192 (and 193) only at Installation.
4.
Press 180 * <hunt> to access hunt groups mailboxes.
GCT
TEL: 310-575-1508
WWW.GCTE.COM
Using the TC-125 with the Operator Console
Get an outside line
Press LINE
Answer a ringing line
Press LINE
Put call on hold
Press PBX HOLD
Retrieve from hold
Press LINE
Call pickup
Press LINE or PICK UP ANY
Hands free call
Dial * then the <ext>
Direct call transfer
XFER <ext> (note 1)
Call transfer to voice mail
TRANS V-MAIL
Public announce
199
TC-6000 announce
198
Conference call
CONF <ext> CONF
Record this conversation
{flash} 183
Allow speaker ring
190
Disallow speaker ring
191 (note 2)
Set key mode & address
192 (note 3)
Cancel key mode
193
Log into your voice mail
Press MESSAGE (note 4)
Operator Console LED Display
Line status
LED display
Color
Available OFF
Ringing Ring
pattern
RED
Busy ON
RED
Busy (I am on this line)
ON
GREEN
On-hold (my line)
Fast blinking
GREEN
On-hold (not my line)
Fast blinking
RED
