GCE Vectrex Spinball, Manual

Page: 7 / 16

7
When your ball appears at the bottom of the chute, use the
Joystick to set the tension on the plunger spring. (The
further back you pull the Joystick, the more speed your ball
will have when it is released). Press Button 4 to release the
ball into play. Use Buttons 2 and 3 to control the left and
right sets of flippers which will help keep the ball in motion.
Once the ball is in play, use the Joystick to control the
hitting or “juking” of the pinball table. This traditional pinball
feature helps influence the motion of the ball. But be
careful, if you use the Joystick too often in a short period of
time, you will “tilt” the machine and lose the ball in play.
Your goal in SpinBall is to keep each ball in play as long
as possible, hitting as many targets as you can and
scoring the greatest number of points. There are a total of
five balls in the game.
Game Play
Once you select the number of players, press Button 4 to
automatically prepare the pinball table with your first of five
balls.
Starting Game Play
a two-player game, only the built-in control panel is used.
Players take turns using this control panel.
You can return
to a one-player game by pressing Button 1 again before
starting game play.
2
Button 1 once to switch to a two-player game.
PLAYER will then show on the screen. When played as
1
SpinBall can be played as either a one or two-player
game.
When PLAYER
appears on the screen, press
Player Selection
How To Play