GCE Vectrex LIGHT PEN Mail Plane, Manual, Page: 5 / 16

+ Make sure the console power cord is plugged into a
120 volt AC 60 cycle electrical outlet.
+ Check to be sure the plug for the built-in control panel
is firmly seated in the control panel outlet on the right.
+
Plug the Vectrex Light Pen into the outlet marked ‘2nd
Player’ (to the left of where the control panel is plugged
in).
+ MAKE SURE THE CONSOLE IS TURNED OFF BE-
FORE INSERTING THE CARTRIDGE. Insert the MAIL
PLANE cartridge into the cartridge slot with the label side
up. Be sure it is firmly inserted to the guideline marked
on the cartridge.
+
Turn the OFF/ON/VOLUME CONTROL to the ON posi-
tion (clockwise). You will see the Vectrex title for a few
seconds, then the MAIL PLANE title, followed by the
Menu.
+ Adjust the volume control to the desired listening level.
+ IMPORTANT — Adjust the BRIGHTNESS CONTROL
(on back of console) so that the white dot in the center
of the screen just barely disappears. If the brightness is
too dim, the Light Pen will not provide maximum
performance
Setting Up
3